Be aware of your buffer size

-
With audio tracks but no MIDI the maximum buffer size available is 4096, which allows for many plugins to run. However with MIDI tracks the highest buffer size available is 512 to allow for acceptable MIDI playback (this is an iOS limitation), so if you are using MIDI tracks you won't be able to run as many plugins.

However if you separate the recording phase from the mixing phase, and freeze the MIDI to audio (you can use the "Bounce Track in Place" option in the Process menu) you can then increase the buffer size at the mix stage.

Comments

Post a Comment

Popular posts from this blog

Real-time audio warping

-
Image
If your guitar playing is anything like mine you will usually need to tighten up your performances after you have recorded them. With Auria's real-time warping you can fix small timing errors or even completely change the feel of a rhythmic part. Here I have a guitar part where the timing is slightly out in places: First I need to anchor the waveform so I place the locator at a transient where the timing is good, and I go to Edit --> Transients --> Add Transient Marker: Then I add some more markers, including another anchor at the end of the section I want to warp: Next I tap the "trn" button to change its state to "warp" and move the transient markers to fix the timing: To help with adding the markers you can use the zoom function in the toolbar to magnify the waveform: With guitar strums I find it's generally better to have the transients placed just before the beat so that the main part of the strum coincides with th
Read more

Using Channels as AUX Sends

-
Image
If you have an empty track you can set it's input from any of the AUX channels (there are 6 of them now), and any effects you add on that track can be dialed in to all the other tracks via the AUX send. The great thing about this is that you can for example EQ you reverb send separately from the main signal. If your reverb is too bright for example, simply put an EQ after it in the chain. Just be aware of one potential catch: if you put an effect on the AUX send itself, that will be blended with any busses in parallel - so if you want the chain to be in series leave the AUX slot on the master strip empty, and use a channel with the AUX as an input. Create a new track and select AUX 1 as the input: Any audio on this track will be ignored BTW. Next add your effects in series as inserts on this channel: Next, and this is a little counter-intuitive, leave the AUX input on the Master strip empty: Because if you add an effect there it will be blended in parallel with the other effect
Read more

Record MIDI from Animoog:

-
Image
On a new MIDI track open the Channel Strip and add Animoog as a new instrument: Switch to Animoog, go to the Setup page and set Auria as the input and output. If you want to send Aftertouch make sure to activate the Send Ch. Pressure and Send Poly Pressure buttons: Then return to Auria, record-enable your MIDI track, set a count-in and start recording. Switch back to Animoog and play. The MIDI will be recorded:
Read more